close
2020
Computational optimization of porous structures for electrochemical processes
Processes - MDPI
Vol 8, 1205
Open access
2020
Digital Rock Physics for Elastic Characterization of Organic-Rich Source Rocks
SEG Technical Program Expanded Abstracts
extended paper - Poster
Open access
2020
Simulating permeability reduction by clay mineral nanopores in a tight sandstone by combining µXCT and FIB-SEM imaging
Solid Earth - Discussions
Available online 30 September
In Press
Open access
Open access
2020
Generation of Material Twin using Micro CT scanning
in CT scan generated material twins for composites manufacturing in Industry 4.0
Springer, Singapore
19-52
2020
Experimental-Numerical Hybrid Reinforcement Characterization Framework
in CT scan generated material twins for composites manufacturing in Industry 4.0
Springer, Singapore
73-94
2020
Reinforcement Compaction Response
in CT scan generated material twins for composites manufacturing in Industry 4.0
Springer, Singapore
95-113
2020
Flow Fields and Reinforcement Permeability
in CT scan generated material twins for composites manufacturing in Industry 4.0
Springer, Singapore
115-151
2020
Experimental-Empirical Hybrid Approach
in CT scan generated material twins for composites manufacturing in Industry 4.0
Springer, Singapore
153-170
2020
Unraveling the limitations of solid oxide electrolytes for All-Solid-State electrodes through 3D Digital Twin structural analysis
Nano Energy
Available online 9 October, 105456
In Press
2020
Deep learning-based semantic segmentation of µCT images for creating digital material twins of fibrous reinforcements
Composites
Part A: Applied Science and Manufacturing
In Press, 106131
2020
Data-driven microstructure sensitivity study of fibrous paper materials
Materials & Design
Available online 30 September, 109193
In Press
Open access
Open access
2020
Experimental and computational investigation of intra- and interlayer space for enhanced depth filtration and reduced pressure drop
ACS Applied Materials & Interfaces
Available online 29 September
In Press
2020
Impact of washcoat distribution on the catalytic performance of gasoline particulate filters as predicted by lattice boltzmann simulations
Chemical Engineering Journal
Available online 19 September, 12740
In Press
2020
Numerical analysis on transport properties of self-humidifying dual catalyst layer via 3-D reconstruction technique
International Journal of Hydrogen Energy
In Press
Available online 25 August
2020
The electrode tortuosity factor: why the conventional tortuosity factor is not well suited for quantifying transport in porous Li-ion battery electrodes and what to use instead
npj Computational Materials
Vol 6 (123)
Open access
2020
High fidelity simulation of ultrafine PM filtration by multiscale fibrous media characterized by a combination of X-ray CT and FIB-SEM
Pre-print / not yet peer-reviewed
Open access
2020
Advanced design of fiber-based particulate filters: Materials, morphology, and construction of fibrous assembly
Polymers
Vol 12
Review
Review
174
2020
Digital Twin-driven all-solid-state battery: Unraveling the physical and electrochemical behaviors
Advanced Energy Materials
Early View
Available online 26 July
2020
Investigating electrode calendering and its impact on electrochemical performance by means of a new discrete element method model: Towards a Digital Twin of Li-Ion battery manufacturing
ChemRxiv
Pre-print / not yet peer-reviewed
Open access
2020
The effective thermal conductivity of double-reinforced composites
Heat and Mass Transfer
Open access
2020
Creep compaction and µCT based permeability measurement of aerospace-gade out-of-life prepregs
Materials Today - Communications
Vol 25
December 2020
December 2020
101419
Available online 2 July
Available online 2 July
2020
In situ investigation of atmospheric plasma-sprayed Mn-Co-Fe-O by synchrotron X-ray nano-tomography
Journal of Material Sciences
Ceramics
Open access
Open access
2020
Understanding electrolyte infilling of lithium ion batteries
Journal of the Electrochemical Society
Available online
Open access
2020
Filtration of simulated martian atmosphere for in-situ oxygen production
Planetary and Space Science
In Press
Available online
Available online
9 June
104975
104975
2020
Physical property analysis of composite electrodes with different active material sizes and densities using 3D structural modeling (in Korean; Abstract in English)
Journal of the Korean Electrochemical Society
Vol 23(2)
39-46
Open access
Open access
2020
Connecting microscopic structures, mesoscale assemblies, an macroscopic architectures in 3D-printed hierarchical porous covalent organic framework foams
Journal of the American Chemical Society
Vol 142(18)
8252-8261
2020
Real structure micromodels based on reservoir rocks for enhanced oil recovery (EOR) applications
The Royal Society of Chemistry
Lab on a Chip
Open access
2020
AutoMat - Automatic differentiation for generalized standard materials on GPUs
arXiv.org / Cornell University
Open access
2020
Microstructural analysis of Eucalyptus nitens wood through computed microtomography
Wood Material Science & Engineering
Published online 2 June
2020
Microscopic stresses in carbon nanotube reinforced aluminum matrix composites determined by in-situ neutron diffraction
Journal of Materials Science & Technology
In Press
Available online
Available online
16 May
2020
Core plug and 2D/3D-image integrated analysis for improving permeability estimation based on the differences between micro- and macroporosity in Middle East carbonate rocks
Journal of Petroleum Science and Engineering
Vol 193
107335
2020
Numerical investigation of the impact of washcoat distribution on the filtration performance of gasoline particulate filters
Chemical Engineering Science
Vol 221
115656
2020
Investigation of gas diffusion phenomena in porous catalyst support pellets based on microstructure
Catalysis Today
In Press
Available online
Available online
12 May
2020
One head, many approaches - comparing 3D models of a fossil skull.
In: Photogrammetrie - Laserscanning - Optische 3D-Messtechnik. Luhmann, T & Schumacher, C. (Eds.)
In: Photogrammetrie - Laserscanning - Optische 3D-Messtechnik. Luhmann, T & Schumacher, C. (Eds.)
Wichmann - VDE Verlag
Beiträge der Oldenburger 3D-Tage 2020
22-31
Open access
Open access
2020
Tomographic reconstruction and analysis of a silver CO2 reduction cathode
Advanced Energy Materials
2000488
Open access
2020
Fast charging of Lithium-ion batteries via electrode engineering
Journal of the Electrochemical Society
Vol 167
090508
Open access
Open access
2020
Poisson's ratio of porous and cellular materials with randomly distributed isometric pores or cells
Journal of the American Ceramic Society
In Press
Available online
Available online
31 March
2020
A virtual permeability measurement framework for fiber reinforcements using micro CT generated digital twins
International Journal of Lightweight Materials and Manufacture
In Press
Available online
Available online
Open access
2020
The impact of cleat connectivity on coal seam gas geomodels' 3D permeability
SEG Global Meeting Abstracts
Asia Pacific URTEC
18-19 November 2019
2020
Ex-situ visualization of the wet domain in the microporous layer in a polymer electrolyte fuel cell by X-ray computed tomography under water vapor supply
Electrochemistry Communications
Vol 111
106644
Open access
Open access
2020
Characterization of lyophilization of frozen bulky solids
Chemical Engineering & Technology
Vol 43
Open access
2020
Characterization of lyophilization of frozen bulky solids
Chemical Engineering & Technology
Vol 43
Open access
2020
Data Structures and Workflows for ICME
Integrated Computational Materials Engineering (ICME)
S. Ghosh, C. Woodward, C. Przybyla (eds)
19-53
2020
Image-based fracture pipe network modelling for prediction of coal permeability
Fuel
Vol 270
117447
2020
Optimization of metal powder particle size distribution for powder bed fusion process via simulation (in Korean; Abstract in English)
Journal of Korean Powder Metallurgy Institute
Vol 27(1)
44-51
2020
Using 3D image analysis techniques to understand the formation of the plastic layer during the heating of Australian coking coal blends
ACS Energy Fuels
Vol 34(3)
3153-3160
2020
Modeling effective ionic conductivity and binder influence in composite cathodes for All-Solid-State batteries
ACS Applied Materials & Interfaces
Vol 12, 11
12821-12833
2020
Multi-scale pore morphologies of a compressed gas diffusion layer for polymer electrolyte fuel cells
International Journal of Heat and Mass Transfer
Vol 152
119537
2020
4D-resolved physical model for Electrochemical Impedance Spectroscopy of Li(Ni1-x-yMnxCoy)O2-based cathodes in symmetric cells: Consequences in tortuosity calculations
Journal of Power Sources
Vol 454
227871
Open access
Open access
2020
Simulating study on mechanical properties of rock wool board for thermal insulation on external walls
Advances in Materials Science and Engineering
Vol 2020
Open access
Open access
Article ID 4028941, 11 pages
2020
Analysis of interfacial effects in all-solid-state batteries with thiophosphate solid electrolytes
ACS Applied Materials & Interfaces
12(8)
9277-9291
2020
The use of X-ray computed tomography for design and process modeling of aerospace composites: A review
Materials & Design
Vol 190
108553
Open access
Open access
2020
Phase mixture modeling of the grain size dependence of Young’s modulus and thermal conductivity of alumina and zirconia ceramics
Journal of the European Ceramic Society
Vol 40(8)
3181-3190
2020
3D microstructural characterization and mechanical properties determination of short basalt fiber-reinforced polyamide 6,6 composites
Composites
Part B: Engineering
online January 31
online January 31
107839
2020
Computing pore size distribution in non-woven fibrous filter media
Fibers and Polymers
Vol 21
196-203
2020
Influence of conductive additives and binder on the impedance of Lithium-ion battery electrodes: Effect of morphology
Journal of the Electrochemical Society
Vol 167
Open access
Open access
013546
2020
Digital sand core physics: Predicting physical properties of sand cores by simulations on digital microstructures
International Journal of Solids and Structures
Vol 188-189
155-168
2020
Preparing micro/nano-fibrous filters for effective PM 2.5 under low filtration resistance
Chemical Engineering Science
Vol 217
115523
2020
Sensitivity analysis of Pore Morphology Method and X-ray CT imaging in SWCC predictions for Ottawa sand
Advances in Computer Methods and Geomechanics
Lecture Notes in Civil Engineering
Vol 55, 105-119
2020
Micro-scale layered structural filtration efficiency model: probing filtration properties of non-uniform fibrous filter media
Separation and Purification Technology
Vol 236
116037
2020
Long-term effects of conventional tillage and no-tillage on saturated and near-saturated hydraulic conductivity - can their prediction be improved by pore metrics obtained with X-ray CT?
Geoderma
Vol 361
114082
2020
Fluffy Polypropylene-Polyethylene glycol fabrics with branched micro- and nanofibrous structures for rapid liquid transport
Polymer Testing
Vol 83
106310
2020
Relationship between wetting and capillary pressure in a crude oil/brine/rock system: From Nano-scale to core-scale
Journal of Colloid and Interface Science
Vol 562
159-169
Open access
Open access
2020
Quantifying the influence of microstructure on effective conductivity and permeability: virtual materials testing
International Journal of Solids and Structures
Vol 184
211-220
2020
Simulating permeabilities based on 3D image data of a layered nano-porous membrane
International Journal of Solids and Structures
Vol 184
3-13
2020
Confinement effect on porosity and permeability of shales
Scientific Reports-Nature Research
Vol 10
Article 49
Open access
Open access
2020
Functionalization of silk fibers by PDGF and bioceramics for bone tissue regeneration
Coatings
Vol 10(1)
810-817
2020
A three dimensional kinetic Monte Carlo model for simulating the carbon/sulfur mesostructural evolutions of discharging Lithium sulfur batteries
Energy Storage Materials
Vol 24
472-485
Open access
Open access
2020
Voxel agglomeration for accelerated estimation of permeability from micro-CT images
Journal of Petroleum Science and Engineering
Vol 184
106577
Open access
Open access
2020
Capillary suction measurements in granular materials and direct numerical simulations using X-ray computed tomography microstructure
Journal of Geotechnical
and Geoenvironmental Engineering
and Geoenvironmental Engineering
Vol 146(1)
04019121
2020
Unsteady-State Coreflooding Monitored by Positron Emission Tomography and X-ray Computed Tomography
SPE Journal
Vol 25(1)
2020
Hierarchical micro/nanofibrous filter for effective fine-particle capture
Powder Technology
Vol 360
1192-1199
2020
Ultra-thin double Janus nanofiltration membrane for separation of Li+ and Mg2+: “Drag” effect from carboxyl-containing negative interlayer
Separation and Purification Technology
Vol 230
115567
2020
In-plane 2-D patterning of microporous layer by inkjet printing for water management of polymer electrolyte fuel cell
Renewable Energy
Vol 146
960-967
2019
Reactive flow in porous media based on numerical simulations at the pore scale
Doctoral Thesis
Johannes Gutenberg-Universität Mainz
Open access
2019
Solvent-dependent recovery characteristic and asphaltene deposition during solvent extraction of heavy oil
Fuel
December 1, 2019
116716
2019
Conformal Cu coating on electrospun nanofibers for 3D electro-conductive networks
Advanced Electronic Materials
Vol 6(2)
2019
Workflow for upscaling wettability from the nano-to-core-scales
SCA 2019 Annual Conference
August 2019
Open access
2019
Developing a fundamental understandingof how oil impacts diagenesis and the effect in transport properties by investigating rock samples from close to the oil-water contact, Ben Nevis formation, Hebron field
Master Thesis
Memorial University of Newfoundland
2019
Dimension-controlled solid oxide electrolytes for all-solid-state electrodes: Percolation pathways, specific contact area, and effective ionic conductivity
Chemical Engineering Journal
In Press
Available online November 22, 2019
Available online November 22, 2019
123528
2019
Thermal conductivity of snow, firn, and porous ice from 3-D image-based computations
Geophysical Research Letters
November 13, 2019
2019
Predicting resistivity and permeability of porous media using Minkowski functionals
Transport in Porous Media
November 6, 2019
Open access
2019
Modeling transverse micro flow in dry fiber placement preforms
Journal of Composite Materials
November 4, 2019
Preprint
Preprint
2019
Analysis of soil structural and transfer properties using pore scale images and numerical modelling
Doctoral Thesis
Université Grenoble Alpes
Open access
2019
Mechanical behavior of TPMS-based scaffolds: a comparison between minimal surfaces and their lattice structures
Springer Nature (SN)
Applied Sciences
Applied Sciences
Vol 1
1145
2019
From three-dimensional morphology to effective diffusivity in filamentous fungal pellets
Biotechnology and Bioengineering
Vol 116(12)
3360-3371
Open access
Open access
2019
Polymer Electrolyte Water Electrolysis: Correlating Porous Transport Layer Structural Properties and Performance: Part I. Tomographic Analysis of Morphology and Topology
Journal of the Electrochemical Society
Vol 166(4)
F270-F281
2019
Designing optimally-graded depth filter media using a novel multiscale method
AIChE Journal
Vol 66(2)
16808
Open access
Open access
2019
Runtime optimization of a memory efficient CG solver for FFT-based homogenization: Implementation details and scaling results for linear elasticity
Computational Mechanics
Vol 64(5)
1339-1345
Open access
Open access
2019
Analytical study on the 3D-printed structure and mechanical properties of basalt fiber-reinforced PLA composites using X-ray microscopy
Composites Science and Technology
Vol 175
18-27
2019
Enhancement of the mechanical properties of basalt fiber-reinforced polyamide 6,6 composites by improving interfacial bonding strength through plasma-polymerization
Composites Science and Technology
Vol 182
107756
2019
Impact of carbon support corrosion on performance losses in Polymer Electrolyte Membrane fuel cells
Journal of the Electrochemical Society
Vol 166(13)
F956-F962
Open access
Open access
2019
Experimental and computational study of unsaturated flow in a stack of thin layers: Application to non-woven hygiene products
Doctoral Thesis
Universiteit Utrecht
Open access
2019
Analysis of variance of porosity and heterogeneity of permeability at the pore scale
Transport in Porous Media
Vol 130(2)
1-21
2019
Permeability prediction using multivariant structural regression
Proceedings of the Society
of Core Analysts (SCA) Annual Symposium
of Core Analysts (SCA) Annual Symposium
013
2019
Identification of channeling in Pore-Scale Flows
Geophysical Research Letters
Vol 46(6)
3270-3278
2019
Machine Learning Approaches for Designing mesoscale structure of Li-Ion battery electrodes
Batteries
Vol 5(3)
54
Open access
Open access
2019
Microstructure- and theory-based modeling and simulation of batteries and fuel cells
Chemie Ingenieur Technik
Vol 91(6)
2019
Microstructural feature analysis of commercial Li-ion battery cathodes by focused ion beam tomography
Journal of Power Sources
Vol 427
1-14
2019
Influence of the Carbon Black Dispersing Process on the Microstructure and Performance of Li-Ion Battery Cathodes
Energy Technology
1900161
2019
Estimation of mass transfer rate and primary drying times during freeze-drying of frozen maltodextrin solutions based on x-ray µ-computed tomography measurements of pore size distributions
Journal of Food Engineering
Vol 260
50-57
2019
Joint structural and electrochemical modeling: Impact of porosity on lithium-ion battery performance
Electrochimica Acta
Vol 314
20-31
2019
Equivalent Permeability of Adjacent Porous Regions
Advances in Science and Engineering Technology
ASET International Conference
May 2019
2019
Self-assemblies of nucleolipid supramolecular synthons show unique self-sorting and cooperative assembling process
Nanoscale
Vol 24
11956-11966
2019
Microstructural Imaging and Characterization of Organic Matter Presented in Carbonate Oil Reservoirs
SPE Europec
81st EAGE Conf & Exhib
81st EAGE Conf & Exhib
2019
2019
Highly filled papers, on their manufacturing, processing, and applications
Advanced Engineering Materials
Vol 21(6)
Open access
2019
Pore scale modelling of calcite cement dissolution in a reservoir sandstone matrix
E3S Web Conferences
Vol 98
Article 05010
2019
Thermomechanical Mean-Field modeling and experimental characterization of long fiber-reinforced sheet molding compound composites
Doctoral Thesis
Karlsruhe Institute Technology
KIT Scientific Publishing
KIT Scientific Publishing
Open access
2019
Boosting rechargeable batteries R&D by multiscale modeling: Myth or reality?
Chemical Reviews
Vol 119
4569-4627
Open access
Open access
2019
A critical review on the absorptive glass mat (AGM) separators synergistically designed via fiber and structural parameters
Journal of Power Sources
Vol 430
175-192
2019
Efficient Multiscale Methods for Viscoelasticity and Fatigue of Short Fiber-Reinforced Polymers
Key Engineering Materials
Vol 809
473-479
2019
Continuum-scale modeling of water infiltration into a stack of two thin fibrous layers and their inter-layer space
Chemical Engineering Science
Vol 207
769-779
2019
Infiltration response of adsorbent amended filters for stormwater management under freezing / thawing conditions
Water
Vol 11(12)
Open access
Open access
2619
2019
Finite Element Method (FEM) Model and Performance Analysis of Solid Oxide Fuel Cells
Doctoral Thesis
Karlsruhe Institute Technology
KIT Scientific Publishing
KIT Scientific Publishing
Open access
2019
Scale-Dependent Correlation to Improve Water Saturation and Permeability Estimates in Unconventional Reservoirs
URTEC Conference paper
1125-MS
20 pages
2019
Effect of X-ray CT resolution on the quality of permeability computation for granular soils: definition of a criterion based on morphological properties
Soil Research
Vol 57(5)
2019
Electrocatalytic reduction of gaseous CO2 to CO on Sn/Cu nanofiber-based Gas Diffusion Electrodes
Advanced Energy Materials
Vol 9(32)
2019
Imaging spontaneous imbibition in full Darcy-scale samples at pore-scale resolution by fast X-ray tomography
AGU 100
July 2019
Open access
2019
Application of X-ray computed tomography for the virtual permeability prediction of fiber reinforcements for liquid composite molding processes: A review
Composites Science and Technology
Vol 184
Article 107828
Open access
Open access
2019
Modeling and simulation of cabin air filtration with focus on electrostatic effects
Doctoral Thesis
Universität Stuttgart
2019
Homogenization-based multiscale analysis for equivalent mechanical properties of nonwoven carbon-fiber fabric composites
Journal of Mechanical Science and Technology
Vol 33(10)
4761-4770
2019
An enhanced finite element model considering multi strengthening and damage mechanisms in particle reinforced metal matrix composites
Composite Structures
Vol 226
Article 111281
2019
Generation and porous flow simulation of virtual granular packings (in German)
Master Thesis
Montan Universität Leoben
2019
Digital Rock Evaluation of the Thermal Conductivity and Electrical Resistivity of Source Rocks
Microscopy and Microanalysis
Vol 25(s2)
2424-2425
2019
XCT-scan assisted flow path analysis and permeability prediction of a 3D woven fabric
Composites
Part B: Engineering
Vol 176
Vol 176
107320
2019
Modelling Geometries and Simulation of fluid flow in Airlaids for Virtual Material Design
Master Thesis
RWTH Aachen University
2019
Coal permeability stimulation by NaClO oxidation
The APPEA Journal
Vol 59(2)
846-850
2019
Simulation of performance of fibrous filter media composed of cellulose and synthetic fibers
Cellulose
Vol 26(12)
7051-7065
2019
Using nano-XRM and high-contrast imaging to inform micro-porosity permeability during Stokes-Brinkman single and two-phase flow simulations on micro-CT images
EarthArXiv Preprints
(for Advances in Water Resources)
(for Advances in Water Resources)
May 2019
2019
A Novel simulative-experimental approach to determine the permeability of technical textiles
Key Engineering Materials
Vol 809
487-492
2019
Bioinspired calcium phosphate mineralization on Net-Shape-Nonwoven chitosan scaffolds stimulates human bone marrow stromal cell differentiation
Biomedical Materials
Vol 14
045017
Open access
Open access
2019
Rock compressibility from microcomputed tomography images: Controls on digital rock simulations
Geophysics
Vol 84(4)
WA127-WA139
2019
Computational analysis of nonuniform expansion in polyurethane foams
Polymers
Vol 11(1)
2019
Longitudinal and transverse flows in fiber tows: Evaluation of theoretical permeability models through numerical predictions and experimental measurements
Composites
Part A: Applied Science and Manufacturing
Vol 119
Vol 119
73-87
2019
Wettability and wettability alteration at the pore- and nano- scales
Doctoral Thesis
Imperial College London
2019
Electrode design methodology for all-solid-state batteries: 3D structural analysis and performance prediction
Energy Storage Materials
Vol 19
124-129
2019
Microstructural modeling of composite cathodes for all-solid-state batteries
The Journal of Physical
Chemistry
Chemistry
Vol 123(3)
1626-1634
2019
Characterization and performance evaluation of lithium-ion battery separators
Nature Energy
Vol 4
16-25
2019
Approximating Permeability of Microcomputed-Tomography Images Using Elliptic Flow Equations
SPE Journal
Vol 24(3)
1154-1163
2019
In-plane virtual permeability characterization of 3D woven fabrics using a hybrid experimental and numerical approach
Composites Science and Technology
Vol 173
99-109
2019
Computations of permeability of large rock images by dual grid domain decomposition
Advances in Water Resources
Vol 126
1-14
2019
Deconstructing electrode pore network to learn transport distortion
Physics of Fluids
Vol 31
122005
2019
Indicators for the adaptive choice of multi-scale solvers based on configurational mechanics
Multi-scale Simulation of Composite Materials
Chapter 2
15-30
2019
Modelling of Geometrical Microstructures and Mechanical Behaviour of Constituents
Multi-scale Simulation of Composite Materials
Chapter 3
31-56
2019
Parallel Inelastic Heterogeneous Multi-Scale Simulations
Multi-scale Simulation of Composite Materials
Chapter 4
57-96
2019
Imbibition into a thin porous medium : an experimental and pore-scale modeling study of coated paper
Utrecht Studies in Earth Sciences
Vol 171
Open access
2019
Design of High Performance Coated GPF with 2D/3D Structure Analysis
WCX SAE World Congress Experience
April 2019
2019
Computational Analysis of Nonuniform Expansion in Polyurethane Foams
Polymers
Vol 11(1)
100
2019
Tomography based simulation of reactive flow at the micro-scale: Particulate filters with wall integrated catalyst
Chemical Engineering Journal
Vol 378
121919
2019
On the permeability of colloidal gels
Physics of Fluids
Vol 31(2)
021210
2019
Mesoscale modeling in electrochemical devices — A critical perspective
Progress in Energy and Combustion Science
Vol 71
118-142
2019
Numerical Simulation of Gas/Solid Heat Transfer in Metallic Foams: A General Correlation for Different Porosities and Pore Sizes
Transport in Porous Media
Vol 127(2)
481-506
2019
Experimental and numerical investigations on the effect of fracture geometry and fracture aperture distribution on flow and solute transport in natural fractures
Journal of Contaminant Hydrology
Vol 221
82-97
2019
Thermal conductivity and Young's modulus of cubic-cell metamaterials
Ceramics International
Vol 45(1)
954-962
2019
Conductivity and Young's modulus of porous metamaterials based on Gibson-Ashby cells
Scripta Materialia
Vol 159
1-4
2018
The influence of porous-medium microstructure on filtration
Journal of Fluid Mechanics
Vol 861
484-516
2018
Understanding the dynamics of primary Zn-MnO2 alkaline battery gassing with Operando visualization and pressure cells
Journal of the Electrochemical Society
Vol 165(11)
A2528-A2535
2018
Through thickness permeability and compaction characterization of 3D preforms using in-situ µXCT
2018 Adv. Sci & Eng Techn. Int. Conferences (ASET)
2018
Thick Binder-Free Electrodes for Li–Ion Battery Fabricated Using Templating Approach and Spark Plasma Sintering Reveals High Areal Capacity
Advanced Energy Materials
Vol 8(15)
1703031
2018
Comparison and error estimation of 3D fibre orientation analysis of computed tomography image data for fibre reinforced composites
NDT & E International
Vol 95
26-35
2018
Development of Low Pressure and High Performance GPF Catalyst
SAE Technical Paper
2018-01
1261
2018
Three-dimensional microstructure analysis of a polymer electrolyte membrane water electrolyzer anode
Journal of Power Sources
Vol 393
62-66
2018
A Study on Equivalent Mechanical Properties Prediction of Carbon Nanotube Polymer Nanocomposites Using Homogenization Method (in Korean; Abstract in English)
The Korean Society of Mechanical Engineers
Vol 6(2)
151-156
2018
Módelisation du colmatage des filtres plissés THE (Modelling of HEPA pleated filters clogging)
Extended paper
Congrès Français sur les Aérosols 2018
Paris
2018
Non-destructive evaluation of through-thickness permeability in 3D woven fabrics for composite fan blade applications
Aerospace Science and Technology
Vol 82-83
520-533
2018
Characterization and modelling of structure and transport properties of porous ceramics
Ceramic Forum International
Vol 95 (3)
27-32
2018
Pore System Characterization of Carbonate Outcrops from Oman Using X-Ray Tomography Images and Permeability Relationship
Conference Proceedings
80th EAGE Conference & Exhibition
Vol 2018, p. 1-5
2018
Relative Young’s modulus and thermal conductivity of isotropic porous ceramics with randomly oriented spheroidal pores – Model-based relations, cross-property predictions and numerical calculations
Journal of the European Ceramic Society
Vol 38 (11)
4026-4034
2018
Numerical simulation of fluid-fluid-solid reactions in porous media
International Journal of Heat and Mass Transfer
Vol 120
194-201
2018
Evaluation of different approaches to modelling dynamic unsaturated fluid flow conditions in hydrophilic nonwoven fibrous layers
Master Thesis
Universiteit Utrecht
2018
Air-borne particle capture by fibrous filter media under collision effect: A CFD-based approach
Separation and Purification Technology
Vol 193
1-10
2018
Prediction of capillary pressure-saturation relationship for primary drainage in a 3D fibrous porous medium using volume-of-fluid method
European Journal of Mechanics - B/Fluids
Vol 67
357-365
2018
Consistent Scale-Up of the Freeze-Drying Process
Doctoral Thesis
Technical University of Denmark
2018
Resolving the discrepancy in tortuosity factor estimation for Li-ion battery electrodes through micro-macro modeling and experiment
Journal of Electrochemical Society
Vol 165 (14)
A3403-A3426
Open access
Open access
2018
Probing spatial coupling of resistive modes in porous intercalation electrodes through impedance spectroscopy
Physical Chemistry Chemical Physics
Vol 21(7)
3805-3813
2018
Fast FFT based solver for rate-dependent deformations of composites and nonwovens
International Journal of Solids and Structures
Vol 154
33-42
2018
Hydrogen underground storage—Petrographic and petrophysical variations in reservoir sandstones from laboratory experiments under simulated reservoir conditions
International Journal of Hydrogen Energy
Vol 43(45)
20822-20835
2018
Modelling the microstructure and computing effective elastic properties of sand core materials
International Journal of Solids and Structures
Vol 143
1-17
2018
Comparing organic-hosted and intergranular pore networks: topography and topology in grains, gaps and bubbles
Geological Society Special Publications
Vol 484
Open access
2018
Transient three-dimensional simulation of densification process of carbon fibre preforms via chemical vapor infiltration of carbon matrix from methane
Chemical Engineering Science
Vol 176
107-115
2018
High capacity garnet-based all-solid-state Lithium batteries: Fabrication and 3D-microstructure resolved modeling
ACS Appl. Mater. Interfaces
Vol 10(26)
22329-22339
2018
Droplet imbibition into paper coating layer: pore-network modeling simulation
Transport in Porous Media
Vol 125(2)
239-258
Open access
Open access
2018
Investigating structure-property relationships in a carbon-fiber composite
Zeiss Correlative Microscopy - DGM diALOG
April 2017 - 1/2018
22-25
Open access
Open access
2018
Fiber orientation interpolation for the multiscale analysis of short fiber reinforced composite parts
Computational Mechanics
Vol 61
729-750
Open access
Open access
2018
Pore-scale mechanisms of two-phase flow in porous materials
Doctoral Thesis
Universiteit Utrecht
2018
Testing and evaluation of 2D/3D digital image analysis methods and inclusion theory for microporosity and S-wave prediction in carbonates
Marine and Petroleum Geology
Vol 97
592-611
2018
X-ray µCT investigations of the effects of cleat demineralization by HCl acidizing on coal permeability
Journal of Natural Gas Science and Engineering
Vol 55
206-218
2018
Simulation and Analysis of Mechanical Properties of Silica Aerogels: From Rationalization to Prediction
Materials
Vol 11 (2), 214
Open access
2018
Young’s modulus and thermal conductivity of model materials with convex or concave pores – from analytical predictions to numerical results
Journal of the European Ceramic Society
Vol 38 (7)
2694-2707
2018
Young’s modulus and thermal conductivity of closed-cell, open-cell and inverse ceramic foams – model-based predictions, cross-property predictions and numerical calculations
Journal of the European Ceramic Society
Vol 38 (6)
2570-2578
2018
Shear and bulk moduli of isotropic porous and cellular alumina ceramics predicted from thermal conductivity via cross-property relations
Ceramics International
Vol 44 (7)
8100-8108
2018
Modeling of Young's modulus and thermal conductivity evolution of partially sintered alumina ceramics with pore shape changes from concave to convex
Journal of the European Ceramic Society
Vol 38 (8)
3004-3011
2018
Flow along and across glass-fiber wicks: Testing of permeability models through experiments and simulations
AIChE Journal
Vol 64
3491-3501
2018
Experimental and computational analysis of sound absorption behavior in needled nonwovens
Journal of Sound and Vibration
Vol 426
1-18
2018
Design and optimization of fibrous filter media using lifetime multipass simulations
Chemical Engineering & Technology
Vol 41(5)
1-9
2018
Image-based upscaling of permeability in Opalinus clay
Journal of Geophysical Research: Solid Earth
Vol 123
2018
Multiscale simulation of transport phenomena in porous media: from toy models to material models
Material Research Society
(MRS) Communications
(MRS) Communications
Vol 8 (2)
358-371
2017
Mean and full field homogenization of artificial long fiber reinforced thermoset polymers
Proceedings in Applied Mathematics and Mechanics (PAMM)
Vol 17 (1)
Open access
Open access
603-604
2017
Transverse permeability of dry fiber preforms manufactured by automated fiber placement
Composites Science and Technology
Vol 152
57-67
2017
The Permeability Characteristics of Dry Fiber Preforms Manufactured using Automated Dry Fiber Placement
21st International Conference on Composite Materials
20-25 August
Paper - 6 pages
2017
Operando of Gas Diffusion Layers: Saturation and liquid permeability
Journal of the Electrochemical Society
Vol 164 (2)
F115-F126
2017
Pore-scale characterisation of fractured coal
Doctoral Thesis
University of New South Wales, Sydney, Australia
2017
Spontaneous imbibition of liquid in glass fiber wicks, Part II: Validation of a diffuse-front model
AIChE Journal
Vol 64(1)
306-315
2017
Shear rate determination from pore-scale flow fields
Transport in Porous Media
Vol 117
229-246
2017
Fast X-ray micro-CT study of the impact of brine salinity on the pore-scale fluid distribution during waterflooding
Petrophysics
Vol 58 No. 1
36-47
Open access
Open access
2017
Impact of mineralization on digital coal properties
Energy Fuels
Vol 31
11558-11568
2017
Influence of operating conditions and material properties on the mass transport losses of polymer electrolyte water electrolysis
Journal of the Electrochemical Society
Vol 164 (9)
F973-F980
2017
Compression-recovery model of absorptive glass mat (AGM) separator guided by X-ray micro-computed tomography analysis
Journal of Power Sources
Vol 365
389-398
2017
Multi-scale 3D investigations of a commercial 18650 Li-ion battery with correlative electron- and X-ray microscopy
Journal of Power Sources
Vol 357
77-86
2017
Multi-scale structural analysis of gas diffusion layers
Journal of Power Sources
Vol 355
8-17
2017
Multiscale Tomography-Based analysis of polymer electrolyte fuel cells: towards a fully resolved gas diffusion electrode reconstruction
Journal of Electrochemical
Energy Conversion and Storage
Energy Conversion and Storage
Vol 15 (1)
014701 (7 pages)
2017
Characterization of secondary pores in washcoat layers and their effect on effective gas transport properties
Chemical Engineering Journal
Vol 324
370-379
2017
Analyzing gas transport phenomena in secondary pore of washcoat layer determined by X-ray CT and modelling
Chemical Engineering Transactions
Vol 57
1237-1242
2017
In silico modeling of structural and porosity properties of additive manufactured implants for regenerative medicine
Materials Science and Engineering: C
Vol 76
810-817
2017
Airflow and particle transport simulations for predicting permeability and aerosol filtration efficiency in fibrous media
Chemical Engineering Science
Vol 165
154-164
2017
Micro-tomography based analysis of thermal conductivity, diffusivity and oxidation behaviour of rigid and flexible fibrous insulators
International Journal of Heat and Mass Transfer
Vol 108
801-811
2017
Calculation of effective transport properties of partially saturated gas diffusion layers
Journal of Power Sources
Vol 340
111-120
2017
Connectivity and percolation of structural pore networks in a cultivated silt loam soil quantified by X-ray tomography
Geoderma
Vol 287
71-79
2017
Probing the role of electrode microstructure in the Lithium-Ion battery thermal behavior
Journal of the Electrochemical Society
Vol 164 (11)
E3146-E3158
2017
Capillary pressure-saturation relationships for porous granular materials: Pore morphology method vs. pore unit assembly method
Advances in Water Resources
Vol 107
22-31
2017
Fracture flow due to hydrothermally induced quartz growth
Advances in Water Resources
Vol 107
93-107
2017
Characterizing the hydraulic properties of paper coating layer using FIBSEM
Chemical Engineering Science
Vol 160
275-280
2017
Hydraulic apertures of open and sealing fractures
6th International Conference on Coupled THMC Processes in Geosystems
5-7 July
Paper - 2 pages
2017
Modeling the Relationship Between Porosity and Permeability During Oxidation of Ablative Materials
NASA Technical Reports
9th Ablation Workshop
30 August
2017
Spontaneous imbibition of liquid in glass fiber wicks, Part II: Validation of a diffuse-front model
AIChE Journal
Vol 64 (1)
2017
Post-tillage evolution of structural pore space and saturated and near-saturated hydraulic conductivity in a clay loam soil
Soil and Tillage Research
Vol 165
161-168
2017
Simulation of the effect of the porous support on flux through an asymmetric oxygen transport membrane
Journal of Membrane Science
Vol 524
334-343
2017
Investigation of transport property of fibrous media: 3D virtual modeling and permeability calculation
Engineering with Computers
Vol 33
997-1005
2017
Analyzing Gas Transport Phenomena in Secondary Pore of Washcoat Layer Determined by X-ray CT and Modelling
Chemical Engineering Transactions
Vol 57
1237-1242
2017
Micro-tomography based analysis of thermal conductivity, diffusivity and oxidation behavior of rigid and flexible fibrous insulators
International Journal of Heat and Mass Transfer
Vol 108 (Part A)
801-811
2017
Long-term effects of grass-clover leys on the structure of a silt loam soil in a cold climate
Agriculture, Ecosystems & Environment
Vol 247
319-328
2017
Evaluation of microporosity aspect ratio and shear-wave velocity of Middle East carbonates
SEG Technical Program Expanded Abstracts
2017
Pore-system evaluation of Middle East carbonates using synchrotron x-ray µCT
SEG Technical Program Expanded Abstracts
2017
Numerical Modelling of the Acoustics of Low Density Fibrous Media having a Distribution of Fiber Sizes
Publications of the Ray W. Herrick Laboratories
2017
The effect of two different support microstructure of an asymmetric membrane with comparable porosities on flux
Geodict User Meeting 2017
2017
Laboratory X-Ray Microtomography as a tool for 3D visualization of biofilm in porous media made up of zeolite
Annual Conference 2017 Microbiology Society
5 April
2017
Direct observation of active material interactions in flowable electrodes using X-ray tomography
Faraday Discussions
Vol 199
511-524
2016
Thick electrodes for Li-ion batteries: A model based analysis
Journal of Power Sources
Vol 334
191-201
2016
Porosity and permeability determination of organic-rich Posidonia shales based on 3-D analyses by FIB-SEM microscopy
Solid Earth
Vol 7
1145–1156
Open access
Open access
2016
Simulation of cake filtration for polydisperse particles
Chemical Engineering & Technology
Vol 3
559-566
2016
Simulating stress-dependent fluid flow in a fractured core sample using real-time X-ray CT data
Solid Earth
Vol 7
1109–1124
Open access
Open access
2016
Development of electrospun lignin-based fibrous materials for filtration applications
BioResources
Vol 11(1)
2202-2213
2016
X-ray CT analyses, models and numerical simulations – a comparison with common analytical methods of an experimental CO2 study
Solid Earth
7
917-927
2016
Simulation of Cabin Air Filters - Molecular Dynamics vs. Continuum Approach
ECCOMAS Congress 2016
2016
Connected pathway relative permeability from pore-scale imaging of imbibition
Advances in Water Resources
Vol 90
24-35
2016
3D Morphology Design for Forward Osmosis
Journal of Membrane Science
Vol 516
172-184
2016
Microstructure Simulation as Part of Fibrous Filter Media Development Processes – From Real to Virtual Media
Chemical Engineering & Technology
Vol 39 (3)
2015
The LIR space partitioning system applied to the Stokes equations
Graphical Models
Vol 82
58-66
2015
From connected pathway flow to ganglion dynamics
AGU Publications
Vol 90
3888-3894
2015
Mineral precipitation-induced porosity reduction and its effect on transport parameters in diffusion-controlled porous media
Geochemical Transactions
Vol 16:13
Article number 13
Open access
Open access
2015
Degradation of Li/S battery electrodes on 3D current collectors studied using X-ray phase contrast tomography
Nature - Scientific Reports
Vol 5
Article number 10921
Open access
Open access
2015
Study of effective transport properties of fresh and aged gas diffusion layers
Journal of Power Sources
Vol 285
568-579
2015
Analysis of Fibrous Felts for Flexible Ablators using Synchrotron Hard X-ray micro-Tomography
Proceedings of the 8th Eur Symp Aerothermodynamics for Space Vehicles
Lisbon, Portugal
2015
Effect of voxel size in flow direction on permeability and Forchheimer coefficients determined by using micro-tomography images of a porous medium
Progress in Computational Fluid Dynamics
Vol 15 (5)
327-333
2015
Multiscale modeling of lithium ion batteries: thermal aspects
Beilstein Journal of Nanotechnology
Vol 6
987-1007
Open access
Open access
2015
Computational homogenization of elasticity on a staggered grid
International Journal for Numerical Methods in Engineering
Vol 105
693-720
2015
3D microstructure effects in Ni-YSZ anodes: Prediction of effective transport properties and optimization of redox stability
Materials
Vol 8 (9)
5554-5585
2015
Effective transport properties of 3D multi-component microstructures with interface resistance
Computational Materials Science
Vol 96, Part A
277-283
2015
Simulation of osmotic and reactive effects in membranes with resolved microstructure
Proceedings of Filtech 2015
Cologne, Germany
2015
Water flow prediction for membranes using 3D simulations with detailed morphology
Journal of Membrane Science
Vol 487
19-31
2014
Tomography based screening of flow field / current collector combinations for PEM water electrolysis
Royal Society of Chemistry (RSC) Advances
4
58888-58894
2014
Premium Woven Sand Control Screens for Oil and Gas Exploration - Computational Fluid Dynamics (CFD) + Finite Element Methods (FEM)
GKD Sand-Control-Screens Broschure
2014
12-13
2014
The LIR space partitioning system applied to the Stokes equations
Doctoral Thesis
Technische Universität Kaiserslautern
Fachbereich Informatik
Open access
Open access
2014
Fast X-ray Micro-Tomography of Multiphase Flow in Berea Sandstone: A Sensitivity Study on Image Processing
Transport in Porous Media
Vol 105 (2)
451-469
Open access
Open access
2014
3D pore-scale simulation of the fluid flow through the electrodes of high temperature polymeric electrolyte fuel cell
Doctoral Thesis
Politecnico di Torino, Italy
Department of Energy
2014
Numerical prediction of the stiffness and strength of medium density fiberboards
Mechanics of Materials
Vol 79
73-84
2014
Simulation und experimentelle Bestimmung der akustischen Eigenschaften von Hohlkugelstrukturen (Simulation and experimental validation of acoustic properties of hollow sphere structures)
Materialwissenschaft und Werkstofftechnik
Vol 45(5)
2014
CFD optimized woven filter media for wastewater application
Engineering Conferences International (ECI) Symposium Series
2014
2014
Clogging of microporous channels networks: role of connectivity and tortuosity
Microfluidics and Nanofluidics
Vol 17 (1)
Springer-Verlag Berlin Heidelberg 2013
Springer-Verlag Berlin Heidelberg 2013
85-96
2013
Fast numerical computation of precise bounds of effective elastic moduli
Report of the Fraunhofer Institute for Industrial Mathematics (ITWM)
No. 224
16 pages
2013
How coarsening the 3D reconstruction of a porous material influences diffusivity and conductivity values
ECS Electrochemistry Letters
Vol 2 Nr 2
F14-F17
2013
High thermal efficiency acoustic plaster systems in line with market requirements
Report of the Fraunhofer Institut für Bauphysik (IBP)
8 pages
2013
FIB/SEM-based calculation of tortuosity in a porous LiCoO2 cathode for a Li-ion battery
Electrochemistry Communications
Vol 27
77-80
2013
Modelling oil entrapment in sea ice on the basis of 3d micro-tomographic images
Proceedings of the 22nd International Conference on Port and Ocean Engineering under Arctic Conditions
1-10
2013
Modelling the water distribution within a hydrophilic and hydrophobic 3D reconstructed cathode catalyst layer of a proton exchange membrane fuel cell
Journal of Power Sources
Vol 227
260-266
2013
X-ray computed tomography of gas diffusion layers of PEM fuel cells: Segmentation of the microporous layer
Journal of Power Sources
Vol 235
81-86
2013
Pore Size Distribution and Soil Water Suction Curve from Micro-tomography Measurements and Real 3-D Digital Microstructure of a Compacted Granular Media by Using Direct Numerical Simulation Technique
Multiphysical Testing of Soils and Shales
Geomechanics and Geoengineering
171-176
2013
Real-time 3D imaging of Haines jumps in porous media flow
Proceedings of the National Academy of Sciences US (PNAS)
Vol 110(10)
3755-3759
2013
Digital rock physics Benchmarks – Part I: Imaging and segmentation
Computers & Geosciences
Vol 50
25-32
2013
Digital Rock Physics Benchmarks – Part II: Computing effective properties
Computers & Geosciences
Vol 50
33-43
2012
Permeability modeling of fibrous media with bimodal filter size distribution
Chemical Engineering Science
Vol 73
239-248
2012
Homogenization methods for multiphase elastic composites of non-elliptical shape: Comparisons and Benchmarks
European Journal of Mechanics / A Solids
Vol 34
21-37
2012
Modeling and Simulation of Paperboard Edge Wicking
Nordic Pulp and Paper Research Journal
Vol 27 no.2
397-402
2012
Microtomographic quantification of hydraulic clay mineral displacement effects during a CO2 sequestration experiment with saline aquifer sandstone
Environmental Science and Technology
Vol 47(1)
198-204
Open access
Open access
2012
Multifunctional optimization of random hollow sphere stackings
Scripta Materialia
Vol 68 (1)
35-38
2012
Chapter 14. Vliesstoffe für technische Anwendungen (Nonwoven for technical applications)
Vliesstoffe: Rohstoffe, Herstellung, Anwendung, Eigenschaften, Prüfung;
2. Edition
2012
Generating Validated 3D Models of Microporous Ceramics
Advanced Engineering Materials
Vol 15(1-2)
2012
Flow simulation through porous ceramics used as an throttle in an implantable infusion pump
Biomedizinische Technik/Biomedical Engineering
Vol. 57 Suppl. 1
277-280
2012
Multi-scale simulation of paperboard edge wicking using a fiber-resolving virtual paper model
TAPPI Journal
Vol 11(6)
9-16
2011
Effect of liquid water on transport properties of the gas diffusion layer of polymer electrolyte membrane fuel cells
International Journal of Hydrogen Energy
Vol 36
5466-5478
2011
A multi-scale approach to material modelling of fuel cell diffusion media
International Journal of Heat and Mass Transfer
Vol 54
1360-1368
2011
Microstructure simulation of early paper forming using immersed boundary methods
TAPPI Journal
Vol 10(11)
23-30
2011
Advances in Simulation of Technical Meshes
Industrial Equipment News
3 pages
2011
Modeling and CFD-Simulation of woven textiles to determine permeability and retention properties
AUTEX Research Journal
Vol 11(3)
78-83
2011
Transport Properties of the Gas Diffusion Layer of PEM Fuel Cells
Doctoral Thesis
University of Waterloo, Ontario, Canada
Mechanical Engineering
2011
3D simulation of the permeability tensor in a soil aggregate on basis of nanotomographic imaging and LBE solver
Journal of Soils and Sediments
Vol 12(1)
86-96
2011
Permeability of young sea ice from microtomographic images
Master Thesis
Geophysical Institute Univ. Bergen
Physical Oceanography
2011
Pore-Scale Simulations to Determine the Applied Hydrodynamic Torque and Colloid Immobilization
Vadose Zone Journal
Vol 10(13)
3994-4006
2011
Modeling of Ceramic Foams for Filtration Simulation
Advanced Engineering Materials
Vol 13(3)
171-177
2011
Simulation technischer Gewebe - Visualisierung Mehrlagiger Gewebekonstruktionen (Simulation of technical fabrics - Visualization of multi-layer fabric constructions)
Welt der Fertigung
Feb 2011
2011
Drahtgewebe - Mehrlagige Gewebe simuliert (Woven wire cloth - Multi-layer mesh simulated)
Draht (Wire)
Mar 2011
2010
Computer Aided Engineering of Filter Materials and Pleated Filters
Global Guide of the Filtration and Separation Industry
VDL Verlag
191-198
2010
X-ray computed tomography of gas diffusion layers of PEM fuel cells: Calculation of thermal conductivity
International Journal of Hydrogen Energy
Vol 35(8)
3751-3757
2010
Numerical determination of the effective thermal conductivity of fibrous materials. Application to proton exchange membrane fuel cell gas diffusion layers
Journal of Power Sources
Vol 195(5)
1302-1307
2010
Nanotomography of electrical contacts - new insights by high resolution 3D analysis of local material degradation
Eur. Phys. J. Appl. Phys.
Vol 49(2)
22907
2010
Computer Aided Engineering of hydraulic filter elements - From theory to patent and products
Proceedings of the 1st Commercial Vehicle Technology Symposium
68-75
2010
Estimating effective thermal conductivity in carbon paper diffusion media
Chemical Engineering Science
Vol 65(13)
3994–4006
2010
Mesoscale Modeling of Failure in Partially Sintered Metals and Homogenization to Macroscale
LS-DYNA Forum, Bamberg
F-I-21, F-I-31
2009
Microstructure Analysis and Calculation of Thermal Conductivity of Gas Diffusion Layers of PEM Fuel Cells
PEMFC
Abstract 056
Posters A09-10
2009
A Realistic Micro- and Macroscale Modeling of Fluid Infiltration in Thin Fibrous Sheets
Journal of Applied Physics
Vol 105
113522
2009
Determination of Material Properties of Gas Diffusion Layers: Experiments and Simulations Using Phase Contrast Tomographic Microscopy
Journal of the Electrochemical Society
Vol 156(10)
B1175-B1181
2009
Simulation der Rußfiltration und Optimierung des Gefügedesigns im Forschungsvorhaben: Thermochemisch resistentes Cordierit für Dieselpartikelfilter (CorTRePa)
Report of the Fraunhofer Institute for Industrial Mathematics (ITWM)
Final Report BMBF-project CorTRePa
2009
Estimation of the effective conductivities of complex cast iron microstructures using FIB-tomographic analysis
Acta Materialia
Vol 57
5023-5035
2009
An investigation on fluid flow in fibrous materials via image-based fluid dynamics simulations
Doctoral Thesis
North Carolina State University
Open access
2009
Structure and pressure drop of real and virtual metal wire meshes
Report of the Fraunhofer Institute for Industrial Mathematics (ITWM)
Nr. 157
2009
Struktur und Druckverlust realer und virtueller Drahtgewebe
F&S Filtrieren und Separieren
Jahrgang 23, Nr. 2
61-65
2009
Two-Phase Behavior and Compression Effect in the PEFC Gas Diffusion Medium
ECS Transactions
Vol 25(1)
1485-1494
2009
Etude expérimentale et numérique de la dégradation de la mesure nucléaire d'aérosols radioactifs prélevés avec des filtres de surveillance
Doctoral Thesis
Institut de Radioprotection et de Sureté Nucléaire
2009
Design of pleated filters by computer simulations
Report of the Fraunhofer Institute for Industrial Mathematics (ITWM)
Nr. 155
2008
An investigation of aerosol filtration via fibrous filters
Doctoral Thesis
North Carolina State University
Open access
2008
Modeling Liquid Porosimetry in Modeled and Imaged 3-D Fibrous Microstructures
Journal of Colloid and Interface Science
Vol 326
166
2008
A Case Study Of Realistic Two-Scale Modeling of Water Permeability in Fibrous Media
Separation Science & Technology
Vol 43
1901
2008
Filtration performance simulations based on 3D structural data of real filter media
Journal of KONES
Vol 15(3)
277-284
2008
Prediction of air filter efficiency and pressure drop in air filtration media using a stochastic simulation
Fibers and Polymers
Vol 9(1) Special Issue
34-38
2008
Numerical investigation on the transport in a PEMFC using a microstructure reconstruction technique
ECS Transactions
Vol 16(2)
2133-2144
2008
Two-Scale Modeling Approach to Predict Permeability of Fibrous Media
Journal of Engineered Fibers & Fabrics
Vol 3(2) Special Issue
13-18
2008
Characterization of the material microstructure for reactive material design
Report of the Fraunhofer Ernst-Mach-Institut (EMI)
3rd Quarterly Progress Report II/2008
Report I-32/08
2008
Numerical Determination of Two-Phase Material Parameters of a Gas Diffusion Layer Using Tomography Images
Journal of Fuel Cell Science and Technology
Vol 5(2)
21006-21014
2008
Setting a new milestone in filter media design: Simulating performance according to multi pass test based on 3D fiber structures
Proceedings of the 10th World Filtration Congress
I-326
2008
On coupled micro- and macro simulation for Filtration Processes
Proceedings of the 10th World Filtration Congress
I-285
2008
3D Simulation of Macroscopic heat and mass transfer properties from the microstructure of wood fibre networks
Composites Science and Technology
Vol 68(3-4)
608-616
2008
Quantitative 3D characterization of graphite morphologies in cast iron using FIB microstructure tomography
Doctoral Thesis
Saarland University, Saarbrücken, Germany
Engineering Sciences
2007
An efficient approach for upscaling properties of composite materials with high contrast of coefficients
Report of the Fraunhofer Institute for Industrial Mathematics (ITWM)
Nr. 132
2007
Computation of the permeability of porous materials from their microstructure by FFF-Stokes
Report of the Fraunhofer Institute for Industrial Mathematics (ITWM)
Nr. 129
2007
Filtration und Separation in der Automobiltechnik
Chemie Ingenieur Technik
Vol 79(11)
2007
On upscaling heat conductivity for a class of industrial problems
Report of the Fraunhofer Institute for Industrial Mathematics (ITWM)
Nr. 120
2007
Kein Durchkommen für Rußpartikel
Presseinformation ITWM
February 7, 2007
2007
On upscaling heat conductivity for a class of industrial problems
Report of the Fraunhofer Institute for Industrial Mathematics (ITWM)
Nr. 113
2007
Calculation of the Evolution of Surface Area and Free Volume During the Infiltration of Fiber Felts
Chemical Vapor Deposition
Vol 13(12)
705-715
2007
Modeling of Two-phase Behavior in the Gas Diffusion Medium of Polymer Electrolyte Fuel Cells via Full Morphology Approach
Journal of the Electrochemical Society
Vol 154(4)
B419-B426
2006
Filtration in Fahrzeugen: Neuentwicklungen - Innovationen - Trends
Renningen: Expert-Verlag
Haus der Technik Fachbuchreihe 75
16 Seiten
2006
Effective Properties of Nonwoven Textiles from Microstructure Simulation
Progress in Industrial Mathematics
Vol 12
708-712
2006
Design of acoustic trim based on geometric modeling and flow simulation for non-woven
Computational Materials Science
Vol 38(1)
56-66
2007
EJ-HEAT: A fast Explicit Jump harmonic averaging solver for the effective heat conductivity of composite materials
Report of the Fraunhofer Institute for Industrial Mathematics (ITWM)
Nr. 94
2006
Research Note: Computer Simulations of air Filtration including Electric Surface Charges in 3-dimensional fibrous microstructures
Filtration
Vol 6(2)
169-172